GPRS

Overview

GPRS (General Packet Radio Service) allows data to be sent over a cellular network (i.e. the same network cellphones use) in a cost-effective and efficient manner. It can be used on 2G and 3G.

GPRS Modules

If you want to use GPRS for a project, unless you double as an RF and embedded brain-child, you want to buy a GPRS module. GPRS modules can also support CSM modes (the data transmission mode used for a typical phone call).

These modules usually use the AT command interface for communication. The reference guides for these are huge (100-1000 pages)!.

They can also have native support for speakers and microphones for phone calls, reducing the required number of external components. The amplifiers/receivers typically have noise reduction and echo supressors built in.

Popular AT Commands

AT+E1 – Enable echoing of commands
AT+E0 – Disable echoing of commands
AT+CGPRS – Check to see if modem is in GPRS coverage
AT+MIPCALL – Creates a wireless PPP connection with the server and returns a IP address for the modem
AT+CSQ – Return signal strength (RSSI) and bit error information

Examples

The Motorola G30 – A thin, flat SMD GPRS module. Features SIM support, an audio interface, and a SPI logger.