DIP Component Package

Overview

Name Dual In-Line Package
Synonyms
  • N Package (Analog Devices)
  • PDIP (plastic dual-inline package)
  • CDIP (ceramic dual-inline package)
Variants  
Similar To
Mounting TH
Pin Count 4-64
Pitch 2.54mm (0.1mil)
Solderability Easiest chip package to solder! Perfect for protoyping, fits into standard 100mill pitch prototype board.
Thermal Resistance  
Land Area The general land area formula for DIP packages A =1 

  • DIP-300-8 : 94.2mm2
  • DIP-300-16: 188.4mm2
  • DIP-300-32: 376.7mm2
  • DIP-600-32: 686.4mm2
Height 5.0mm
3D Models DIP-300-8DIP-300-16DIP-300-20DIP-600-40
Common Uses
  • Through-hole IC’s
  • DIP switches
  • Relays/reed switches
  • 7-segment, 4-digit LCD character display footprints (with different package)

Comments

The most common through-hole IC package. Now mostly superseded by SMT packages. Has standard 100mill pitch spacing. The two rows of legs are usually 300mill (thin-type), or 600mill (fat-type) apart (400mil and 900mil variants are also present). The 600mill package is usually reserved for the larger pin variants. As well as standard through-hole mounting, they can also be inserted into a socket, either by friction or clamping (zero insertion force). Pin numbering is counter-clockwise from the top-left.

Anti-static packaging can easily be made for DIP packages with foam and aluminium foil as shown in the picture below.

making-antistatic-packaging-for-dip-ic-with-aluminium-foil Anti-static packaging can easily be made for DIP packages with foam and aluminium foil.

Components other than ICs can also use this footprint (although they typically have different packages). One example are some 7-segment, 4-digit LCD character displays, which use the DIP-600-12 footprint.

3D Renders

A 3D render of the DIP-16 component package.
A 3D render of the DIP-16 component package.

  1. n/2)*2.54) * (width + 1.65mm)
    where n is the number of pins and the width is the rated package width in mm (e.g.  7.62 (300mil), 15.24 (600mil