Interrupts

Overview

This page is all about how to use interrupts on a PSoC microcontroller. Covers both component based interrupts (also check out the PSoC Components page) and code based interrupts.

Component-Based Interrupts

The easiest and most common way to create interrupts on a PSoC microcontroller is to use the schematic-based PSoC Interrupt component. This creates the interrupt for you, allows you to edit it’s priority through a GUI, and creates the API to use the interrupt in code. Make sure to check out information about the PSoC Interrupt Component on the PSoC Component page.

Code-Based Interrupts

You have to be aware that not all interrupts have to be created using a PSoC Interrupt component. There are also pure software method for creating/installing interrupts. This can lead to confusion/bugs if the coder expects that all the interrupts running on the PSoC can be seen in the schematics. Cypress defines the cyisraddress data type to store pointers to interrupt handlers. They also define the array CyRamVectors[] which stores the interrupt handlers at the correct locations. This is an example from the FreeRTOS port to the PSoC 5.

The above code installs the neccessary interrupt handlers for the FreeRTOS operating system to work correctly on the PSoC 5. Note that xPortSysTickHandler is the “tick” or “heartbeat” for the operating system,